Questions & Answers for: Toyota Matrix gear

rough gear changing, reolaced selenoid, still the rough gear changing, replaced selenoid, still the same intermittent problem, maybe harness not good . the car shakes when changing gears especially ...

Ad

The light in the automatic gear shift console in my 2006 Matrix is out. I checked the fuses and they are fine. could the bulb need replacing? How do you get to the buld to replace it? illumination not

Ad

...I was replaced a ECM already and the P0770 come out after 1 days. I have the R&R Speed Sensor Gear(33403-19635), ECM (89666-02160) and toyota technical service bulletin(eg020-02) already and on ...

Question about 2006 Matrix

4 Answers

chiled droped a quarter inside where the gear handle and its just diaprears inside, in metrix 2010. is there any future proble? do i need to get it out before go for linge drive? Consider this spot as

...remove the last bolt and the starter. Once the starter is out, inspect the starter drive pinion gear and the flywheel ring gear. Starter drive and flywheel ring gear wear patterns. Courtesy of ...

my car is a 2006 toyoda matrix it has an outo tranmission and it won't shift into 2nd gear and won't go into reverese my car is a 2006 toyota matrix 4x4 xR i had it for six years but it just ...

Question about 2003 Matrix

1 Answer

car makes loud noise starting My 2009 toyota matrix makes a loud screeching noise when my car is off for a long period of time. sounds like your starter needs shimmed and/or replaced or you have a ...

my 1998 matrix pops out of fourth gear. Drives fine in every other gear. Replaced the clutch last year, and it works fine in every other gear. The car drives great in every other gear. There may have ...

Question about 2009 Matrix

2 Answers

...when I shift from drive to park mode the front wheel drive axle does not lock in with transmission gear in turn running away vehicle on uphill park if parking brake was not set firmly.Please help. ...

...Matrix. P0756 on the vehicle. I noticed this code on OBD2 scanner, my transmission stays long at gear 1 to shift to 2 whenever my rpm reach 3000. Also sometimes it will decelerate and suddenly ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...