Questions & Answers for: Chevrolet Suburban gear

Engine RPM too high when transmission shifts. Bangs into gear. Engine gets to a high RPM before it shifts into the next gear. The transmission engages into the next gear and bangs the drivetrain very ...

Ad

97 suburban only shifts out of 1st gear when lifting the accelerator, shifts into other gears ok, when you try to go into passing gear it goes into neutral when lifting accelerator ot goes back into ...

Ad

Need help on a 1995 Chevy Suburban. It will die at idle when it's up to running temp and in gear. I have to pump the gas peddle to keep it from dying. Just did a tune up and throttle body cleaning to ...

...out of park (which had been difficult occasionally) and something felt like it broke and now the gear shift moves freely and will not engage. i have been able to have a friend hold brake while i ...

Hi, I have a 1993 suburban that shifts real hard into 2nd gear but ONLY that gear. the rest of the gears going up are good any suggestions? Most likely is a broken accumalator spring. possible ...

my transmission is slipping out of gear there is plenty of transmission fluid, after stopping and turning off the engine and then restarting it, it went back into gear but only for a few minutes ...

Question about 2000 Suburban

1 Answer

wont shift to high gear? my transmission works good in reverse, first, and second gear,but it wont go in third gear. have to get to three thousand RPM let off gas petal it will shift when you step ...

Question about 1993 Suburban

1 Answer

...puller must be used to remove the reluctor ring. Take out the bolts that hold the camshaft gear to the camshaft. This gear is a light press fit on the camshaft and will come off easily. It

i have a 97 chevy 1500 with a votech 350 2wd it goes in gear fine and shifts but it feels like its shifting to much it keeps going back and forth from hi gear to the next lower gear it also feels like

how does the crankshaft gear come off of a 2002 suburban 5.3 With a puller, put the bolt back in the end of the crank and attach a puller to the gear( hook the puller legs behind the gear) and it ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...