...Email: [email protected]. Thanks. John. OK.. I agree that your problem is with the flag gear. However, there is a specific location in which it needs to be situated. The purpose of the ...
Fuser Gear Md No. LJ 7416 Hi Guys. I was given this all-in -one unit, "if you can fix it, it's yours" senario. I've pulled appart the fuser and found two problems. The LJ 7416 gear has snaped in three
Brother 8840 Fuser Roller Gear The black rollers that pull the paper through the fuser and onto the output tray are attached to a gear. The rollers broke off the gear and I'm wondering if that part is
Gear Racheting Noise Disassembled back and side of unit - grey driver gear that drives the fuser appears to be stripped. Is that gear available - how do you remove that gear? Fuser gear appears to be ...
...or is it remanufactured? The toner cartridge for this model is the TN-350, which has a "flag gear" on the left (gear) side. It is a little plastic piece that sticks out on the new cartridges ...
Gear making a grinding noise It seems to be some kind of paper gear that is grinding behind the toner/ drum cartridge. It makes the noise whether the toner/ drum is in the machine and also when it is ...
Question about IntelliFAX 2800 Laser Fax
...If you push down on key pad area on left side grinding noise sometimes disappears. Sounds like gear grinding. Can this machine be taken apart easily and gears replaced? Are replacement parts ...
...cartridge installed and it still says tonner life ended The toner cartridge in this machine has a gear assembly that resetting the "toner empty" light, it is build in a way that after resetting the ...
Question about MFC 7840W Printer
...other than the upper feed system. ok. one item i have seen cause a problem in that area is a white gear that is attached by a screw. turn your printer around and remove the rear cover, then the next ...
Question about LS-2125 Mechanical Sewing Machine
plastic bobbin gear rod unscrewed, how to align with bobbin round gear A plastic part 3" x ½" with gear teeth along one edge that meshes with a round gear in the bobbin assembly ...
Usually answered in minutes!
1,135 Questions
1,072 Questions
1,012 Questions
767 Questions
733 Questions