Questions & Answers for: ge washing machine tub balance

Question about GE Washing Machines

1 Answer

...machine. I believe you are referring to a GE top loading washer. GE uses a liquid filled balance ring around the top of the washer to help compensate for off balance load. The sound is perfectly ...

Ad

...ge spacemaker washer & dryer unit, it seems that the tub is loosen. the entire tub unit should be able to bounce around in the cabinet. If you have ever heard a wash machine that went off balance the ...

Ad

GE washing machine wjrr4170e1ww has suddenly begun to spin violently even when empty. the washer is about 4-5 yrs old. on a concrete floor and the legs are balanced. any ideas It is your shocks. There

Question about WJSR2070B Top Load Washer

1 Answer

washing machine when move it and think maybe water is building up in the machine. What should I do? What you are hearing is the liquid inside the balance ring at the top of the wash tub. You could set

Question about WJRR4170E Top Load Washer

1 Answer

THE TUB IS WOBBLING AROUND INSIDE THE MACHINE. either the top tubs "balance-ring" is leaking the balance solution and needs replacing or the tub springs are broken or disconnected from the tub

Question about WJRR4170E Top Load Washer

1 Answer

machine it self... ge model wbb2090g5ww There are not supposed to be braces holding the tub. Check that your loads are balanced. tennis shoes, and blankets are the hardest to keep balanced pillows are

Question about WJRR4170E Top Load Washer

2 Answers

tub is off balance the tub just wobbles bouncing off the walls in spin mode Sounds like one of the springs going from the tub to the frame could be broke or unhooked. Also, the washer could be out of ...

Question about WHRE5550K Top Load Washer

1 Answer

...Ge has stabilizer rubber straps at top of outer tub remove front of washer remove 2 1/4 screws to remove top 5/16 screws hold 4 corners of top rim and 1/4 in scews under top frame replace all broken ...

GE stack unit Model: gud27essmww Tub bounces minutes within the spin cycle. Happens on an empty tub also. I have replaced motor and sensor. possible springs holding tub loose or off or tub spinning ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...