Questions & Answers for: ge top load washer hot

...any hot water depends on how old.. but first Check lid swith for not spinning.. No hot water take hose off make sure you getting hot water to the washer... if water to washer.. water valve probley ...

...load with hot water I switch to cold water for next load and the water temp stays on hot. Intermitently (back & forth) switching to cold, sometimes! check to make sure that your hot water isn't ...

GE Profile Top loading Washer Model # WSSR3120W1WW --- No Hot Water ....Only Cold The water diverter could be plugged. or the diverters solinoid has gone bad on the hotwater side. It is located on the

...GE WBSR3140DW Top Load Washer Heres a link to help to find the correct parts. http://www.partstore.com/Model/General+Electric/General+Electric/WBSR3140DW.aspx Hope this info helps to anyone who reads ...

GE profile top load washer. The fabric softner dispenser is caked how do I clean it? Small brush and plain water. Rub, flush, repeat... If it's clogged where you can't get a brush, pour very hot water

...GE large capcity washer check the fill hose washer located in the washer cold water fill hose,they get clogged with lime and such,and when you replace the washer run hot water thru the hose to clean ...

...GE WPRE6150K1WT top load HE washer. I replaced a leaking ( at the hot solenoid) fill valve with a p/n WH12X1075 fill valve and the washer does not fill with hot or cold water now. I'm getting 121v at ...

...GE profile washer. Thanks for any suggestions. sounds like you may need to check your hot water heater for deterioration. since you have done all that you need to check your water supply. a water ...

top panel off.Remove connections on valve. Make mental note for what goes where. ;)Remove valve.Install new valve.Connect wires.Put panel back on and screws back in.Connect water lines hot for hot and

GE Profile top load washer made loud buzz/screech noise. Clothes are coming out with dirt, cat hair, fuzz, etc even after washing twice. And now hot/warm water isn't working. GE Profile top load ...