Questions & Answers for: ge oven bake element 2

...bake element recently burned up. I have a replacement part but I'm concerned where the black ground wiring should be placed. Since this is a self cleaning oven I assume to protect the wire it has a ...

Oven lower element wiring In replacing the main element in this oven, I found three wires (two black, one yellow) attached. Is there a proper connection for this wiring? I suppose the two black wires ...

bake element I need to screw the terminals back on my replacement bake element in but I don't know which side of the element the red wire and yellow wire connect to. I see that one side of the element

oven bake element replacing the bake element . facing the back of the oven there is 2 red wires spliced together and 1 yellow . i wasnt paying attention whether they came from the left or right .does ...

GE Oven JTP15BW Broil Element on, Bake Element off during baking. We have a GE Oven with a model number starting with JTP15BW. When we attempt to bake with this oven, the broil element comes on and ...

GE Oven # J BP65G V1AD. Wires burned through 2" behind attachment point to element. replaced wire with 14 awg stranded high heat nickel appliance wire. In process I erased the pencil mark ...

...element in a GE Range JBP45A. there is a yellow wire, and two black wires. Only 2 prongs on the element. They are re-attached with hex head screws. Are both black wires connected to one prong? Yes, ...

...GE range in which the baking element cracked in one place and needed replaced. I removed the old baking element and was getting ready to install the new one when I noticed that there were not 2 but 3 ...

oven control to bake at 350 degrees and check between the yellow and black wires that go to the bake element. You should have 230 volts. If you have 0 volts, check between the yellow wire that goes to