...any other feature on my console. There is a switch in the lift gate latch that closes when the gate is closed and turns off the light, this switch is defective, replace it and the light will go
gate light on even when gate is closed gate is closed, gate window will not open, car interior lights then stay on Open gate and find where the wiring enters the gate (bottom of door) pull back the ...
GATE LIGHT WON'T TURN OFF MY GATE LIGHT WON'T TURN OFF EVEN THOUGH THE GATE IS CLOSED. Probably a lift gate latch, the switch that turns the light on in the dash is part of the latch, also check the ...
Question about 2005 Getz 1.3
is that operates the tail gate light on the dash board and the luggage compartment light Check with a multi-meter that the switch itself has a open/closed function(ohm meter setting)Hope this helps...
Question about 2007 Tahoe
...light come on when I open my lift gate on my 2007 Tahoe? The interior light is convenient to have when opening the lift gate in the dark. Yes. The gate is like any other door for the light
...gate" light stays on on my dash and the over head lights stay on ... you roll the interior dimmer all the way down) in my 2008 Dodge Caravan. ... Clicking noise in 2008 Dodge Grand Caravan? ... Are ...
Question about 2010 Grand Caravan
how to adjust open close limits on a 4 meter gate for a Germin motor on the shaft that controls the arm or gear for the gate movement there will be 2 cams open the gate and then loosen of one cam and ...
...light? What would that be? Are you sure it doesn't say "Gate"? That would be the rear lift gate. Bad switch which is hooked to the gate latch inside the tailgate. Hope this helps 9ATE is in fact a ...
Question about 2010 Grand Caravan
...gate door ajar light is controlled by the lift gate module or BCM . These modules have their own power supply . Now what problem are you having ? no ajar light showing on the instrument cluster when ...
Question about 2010 Grand Caravan
...light on the gate operator starts flashing. 3. While the indicator light on the gate operator is flashing, press and hold down the desired button on your Genie GM3T remote that you want to program to ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions