Questions & Answers for: Frigidaire gas smell

...smell gas. I don't smell gas when the stove top is used. Any idea what is wrong? Any info would be appreciated! Thanks, Nana Sounds like the ignitor is weak. I would replace the ignitor if is 3 yrs. ...

...smell gas. If the smell is coming from behind the oven, you probably have a leak at one of the connections of the gas line leading from the wall to the oven. If the smell is coming from inside the ...

...a slight smell of gas until it burns. Thanks, Huuum Please remember to lave a solved rating before you leave. The smell remains as long as the oven is operating and gets stronger the longer it is

...smell like oil/gas from machine. Our Frigidaire front load washer works fine, except all of the clothes come out worse than when put in. I don't know if something is leaking in unit, but ALL clothes ...

smell gas in front of the stove every now and then smell gas in front of the stove, doesnt happen very often the gas smell. I checked the connections and they are all good with no gas leak on the ...

gas dryer smells like gas heats up a little bit gas dryer smells like gas and only heats up a little bit. air is coming out outside vent? Hi, The most common problem with gas dryers is the ignitor ...

smell gas when dryer running. no smell when dryer stopps. your not getting enough air to gas mixture to burn the gas completely,you will see an orangish/yellowish flame if the air mix is too ...

...smell gas Warranty Information Contact information 800•944•9044 Electrolux Home Products North America P.O. Box 212378 Augusta, GA 30917 - WHAT TO DO IF YOU SMELL GAS: • Do not try to light any ...

smell gas when I open the oven door. I checked all the connections in the back and the ones behind the back panel, and none are leaking. Are there connections inside the oven I should check? Hello tds

...smell like gas, most likely it's the "new smell" caused by the heat. If you have a kitchen vent fan turn it on. If it persists Call the installer or dealer. No action by them? call the mfg customer ...