Questions & Answers for: gas range oven shut

...range we have the huge 6 burner dual oven and griddle. no manual but smell gas and gas alarm went off. how do you disconnect the line cord/ gas line? The unit does not have it's own shut-off. You'll ...

gas range Connected it up, turned on the shut off valve per instructions, burners all work well, no broiler or oven gas lights, ignitors glow bright. Not rocket science, push bake, set terperature for

...Gas Range E2 F3 We were using the oven on our Whirlpool Gas Range, Model GS470LEMQ when it shut down and the food burned. The error code on the display showed E2 -F3- . I figured the oven over temped ...

gas range model KGRS807S - oven starts then stops kitchenaid gas range model KGRS807S - oven ignites but then shuts down and the display says: kitchenaid 30 AM16 UI15 EEKGO-245. Please help, this unit

...gas to range oven works but no gas to range Check to make sure that you are getting gas to the unit itself. If you are getting gas to the unit from the shut off valve. Then your problem would be the ...

...Gas Range - Oven is 2 years old but never used. Turned on oven and remitted strong gas smell. Fire alarms went off as place filled with gas and smoke. Opened oven door and the inside was smoking. ...

Gas smell after oven is shut off-We just bought a used Tappen gas stove. It was set up for propane but we have natural gas. My husband adjusted all the flames and the burners and oven work fine. ...

jenn-air JGR8855ADS oven problem when using the oven the gas will shut off and then relight with a pop, shuts off and relights again with a pop. Need to replace the shut off,Its bad.

...range). This valve shuts the gas off to the oven. Once you have verified, turn the range back on. If it proves to be ineffective, then the range could possibly be experiencing an issue with the EOC, ...

...gas range model SF388PEWWO. The oven will light and reach temperature. Then when needing to re light to maintain temp the igniter will not come on and the oven goes off. I have replaced ignitor but ...