Question about La Cimbali Espresso Machine
...like you would on a ice maker. Usualy the fittings on coffe machines are 3/8'' (for pipes, or for gas) La Cimbali uses sometimes 1/8'' and that is much a like metric fitting, in diameter is 9.8 mm ...
Question about La Cimbali Espresso Machine
...anyone?? When it comes to gas connections on the espresso machiones I will usually tell my clients to take it to their heating(furnace) expert, because if it is set wrong you can burn down your
Question about Argenta SAE-2 Espresso Machine
I have a old style 2 group lever Astoria coffee machine. It is gas powered and runs from a manual pump. It has started pushing boiling hot water back up from the machine into the pump pipe, which is ...
what is the best way to remove baked coffee in the shower disc Put the shower over a gas stove or open flame, the coffee will burn before the metal.
not heating up Hi, Your problem could be or probably is with the regulator...not enough gas pressure... Propane, LP, or Natural Gas Regulator Problems heatman101
...for your vev vigano. Hope this helps. http://www.espressozone.com/stovetop-espresso-maker-gaskets-GAS.aspx ...
Question about Kontessa Inox 6-Cup Espresso Machine
...espresso makers, water will boil and the gas (liquid to gas at boiling temperature) is pushed through the beans, so its rather hot and the beans doesn't burn.coffee should be as hot as
gas switches off gas burner turns off What is the make and model?
Question about Divina AL2 Espresso Machine
can I run gas astoria machine without turning water pump on, if there's enough water in it? If it is a lever machine, has a manual fill option and connected to water.
...light flashing on my hot water tank control 1 flash every 3 seconds means the pilot is lit and the gas valve is working normally. A solid red status light means the water heater is shutting down. ...
Usually answered in minutes!
1,392 Questions
801 Questions
725 Questions
572 Questions
453 Questions