Questions & Answers for: gas burner low flame

Burner Problem I have a gas stove top. Ever since it was installed, all burners behave the same way. Instead of having a smooth flame height from high heat to low heat, the burners go from high to low

...burner. adjust the gas-air ratio orifice so that the flame has no yellow tips. Unclechuck, My problem is How do I adjust the burner in the oven to blue flames on a GE propane gas range? how do I ...

...gas burner flame on two (out of four) burners stay on a low flame on every setting, I removed the knob from the front console and tried to adjust the flame by turning the screw inside the console, ...

...gas pressure to the oven burner but I don't know I'm not an expert! Any help or suggestions would be greatly appreciated. Thanks! James Smith On top of that safety valve is a nut. Get a good fitting ...

...gas stove top burner model #JP979SEF2SS . One of the burner heads takes a few minutes to light up after the clicking and when it finally does burns with a very short flame (blue) . Tried 1. adjusting ...

...flame meaning low oxygen, whereas blue is an oxidizing flame. There is not enough air mixing with the gas. Clean out the pipes and free the air intake holes on the first stage of the burner

...gas through to main flame. if you look at the main burner you should see the sensor its got a white porcelain base and the sensor is steel looks like a bent nail that hangs over burner. make sure its ...

...low gas flow. If I restrict the gas flow by kinking the delivery tube, the flames get smaller, not bluer. Any ideas? lack of air causing yellow flame burners need cleaning . Burners are blocked or ...

...gas hob, 2 burners have very low flame model SR275XGH2 5 burner, top left burner and outring of central burner have very low flame, was just installed. lpg If two burners on your Smeg SR275XGH2 gas ...

...gas burner knobs. Again, all the burners work but have a low flame. Any ideas on what the problem might be? Thanks. It might be from the burners being dirty or from the electrode not being properly ...