Questions & Answers for: garage roller door

...Garage Door Opener The right bottom roller pin keeps pulling out of the bracket that holds it making the opener not open or close. Shouldn't there be an endcap on the roller pin to keep it from ...

...garage door. Is there a way to take this wheel off or an easy way to get the wheel back onto the track? Get a roller with a long stem. Then open door fully and clamp open. take off cable. unbolt ...

...roller brackets? i tried using different holes for rollers on bracket. Garage door work like a wedge. As it goes down the door get closer to the jam. So if you moove the weather stips closer to the ...

open and close You will need to support that corner of the door and then remove the roller carrier. The roller then need to be put into the rail at an angle and then screw the carrier back to the door

garage door lurches while it is opening changed opener changed a bad roller measured distance between rails If the alignment is true and rollers move with ease, you should not have any jerking motion.

...garage roller door will open but not close what is wrong? Assuming you mean your home sectional door, not roller door. A roller door is what commercial companies use on docks or storage buildings. ...

...Garage Door Operation. The door was backed into with car. I have taken hinges and roller brackets off and straightened them. Reinstalled cables and tensioned lift spring correctly. Door is on 8 ...