Question about 2348 24WIRE 480CPS Draft 136 Col Serial/parallel Matrix Printer
...seated correctly in the printerCheck the ribbon is not jammed or tight to moveCheck the print head gap, ensure this is not trapping the ribbonChange the ribbon for a new oneCheck the ribbon drive is ...
Question about 2348 24WIRE 480CPS Draft 136 Col Serial/parallel Matrix Printer
...correctly mounted on the ribbon drive shaft. Ensure the ribbon is not jammed. Ensure the print head gap is not set to close the ribbon is becomming jammed Try changing the ribbon cartridge for a new ...
how do i adjust the print head gap on a tally genicon 2280+ printer The 2280+ does NOT have a head gap leaver you can adjust the gap from with the menu on the printer. The printer has an automatic gap
..., labels etc or ribbon jams that may prevent the shuttle moving correctly. Also check the Patten gap to make sure it is not closed too much. Then you may need to change shuttle ...
...will be poor; some overlap, etc..; have played with taking ribbon out and in; moving paper adjust; gap; new errors today: nv chksum and svtmreset; not sure if these are even errors; had to switch to ...
...TallyGenicom T6312 printing blank pages This is most likely caused by a problem with the print gap mechanism. It seems the print gap sensor was not able to adjust the gap correctly for your
...any objects which may obstruct the movement of the print head (pen lids etc!) Ensure the print head gap is not set to close to the paper, thus jamming the print head Remove the paper to ensure the ...
Question about 2265+ Matrix Printer
...any objects which may obstruct the movement of the print head (pen lids etc!) Ensure the print head gap is not set to close to the paper, thus jamming the print head Remove the paper to ensure the ...
Question about 2265+ Matrix Printer
Tally 2280+ is printint but it does not display character on the paper gap is not moving. Either gap motor is bad or the main board has a bad gap driver ic.
Question about 2280 Matrix Printer
My printer display Aga error when it power on, what is the solution? AGA means automatic gap adjustment, it probably means it can't handle the paper properly. try adjusting the paper carriers and ...
Usually answered in minutes!
49 Questions
53 Questions
39 Questions
45 Questions
29 Questions