Questions & Answers for: fuser replacement

user error i have problem in my printer hp color laserjet 5550 (fuser error 50.4) FUSER ERROR: . Turn the printer off, wait 10 minutes, and then turn the printer on. 2. If the message persists, reseat

how do i fix a fuser error? 1. Turn the printer off, wait 10 minutes, and then turn the printer on. 2. If the message persists, reseat the fuser. If that does not work, replace the fuser. To check the

I want to fix my Hp laserjet 2840 (Fuser error 50.2) 1. Turn the printer off, wait 10 minutes, and then turn the printer on. 2. If the message persists, reseat the fuser. If that does not work, ...

when printing making loud noise fuser gears. replace the fuser. part number rm1-3740-030cn Check the fuser. Beside the fuser, also check the gears that connects to the fuser. You may put some grease ...

laserjet4 50 intervenire X FUSER ERROR A fuser error has occurred. 1. Turn the printer off, wait 10 minutes, and then turn the printer on. 2. If the message persists, reseat the fuser. If that does ...

...printer off, wait 10 minutes, and then turn the printer on. 2. If the message persists, reseat the fuser. If that does not work, replace the fuser. To check the fuser, turn the printer off and

...do to make the printer good as new. Hi hope this helps the error looks to be low temperature on the fuser as a repairer of machine I would normally recommend a new fuser unit if you use the machine a ...

...install either a genuine Dell REPLACEMENT FUSER, or a PROPERLY refurbished fuser that DOES have a counter chip. Bothe of these will clear the 'Replace Fuser' message (unless the printer is

...50.9 and 50.1 . It change sometimes 50.9 and sometimes 50.1 . How to solve it? 50.1 Error: (Low fuser temperature) 1. Verify the fuser is installed correctly and fully seated. 2. Check that ...

...a fuser chip), and still wants the fuser to be replaced. A new REPLACEMENT fuser from XEROX, or a CORRECTLY refurbished fuser WILL have a counter chip, and therefore clear the REPLACE FUSER