Questions & Answers for: fuse cover

...these steps: 1. Remove the remote positive terminal cap. See ?Remote Positive Terminal? in the Index. 2. Unscrew the knob on the front of the fuse cover counterclockwise. 3. Pull off the

...fuse box cover to access the fuses. To remove the fuse box cover, place a finger behind the PULL tab and your thumb above the PULL tab as shown in the illustration, then pull the cover off. To ...

...fuse panel cover, push in and turn the fastener clockwise Engine Compartment Fuse Block (The Stop Light fuse is located in the box, it is marked "Stop LP") The fuse block is under the hood at the ...

...fuse box cover. Check the functionality of the new fuse once you restart the Bonneville. Read more: How to Replace the Fuses in a Pontiac Bonneville ' eHow.com ...

...cover. One 30A spare fuse should be located in the main fuse box. To access the fuse bank containing the other six fuses remove the right crank case cover, once it is cool to the touch. One 10A and ...

...fuse box cover to be certain. Match the fuses on cover to actual fuses in the box, maybe the previous owner took out fuse. Pull each fuse out one by one and check them if not burn't out get a 15 amp ...

...fuse block cover by unscrewing the plastic hex bolt in the center of the cover and releasing the plastic overlap catches on either side of the cover). Fuse layout legends are printed on the inside of ...

...works On the fuse box THERE SHOULD be a cover...when you remove the cover it SHOULD detail which fuse relates to the specific part of the electrical system ?? possibly on the reverse of the

...cover. Place the wide end of the fuse puller over the plastic end of the fuse. Squeeze the ends over the fuse and pull it out. Spare fuses are located in the slots labeled "Spare" on the following ...

fuse box cover on the driver's side of the engine compartment. Remove the cover by pressing in the tabs on the sides of the cover. Look at the fuse diagram on the inside of the cover or in the owner's