Question about Kitchen Aid Kitchenaid 5-speed Ultra Power Blender Blenders 5-Speed Blender
...Blender Classic We were using our machine to make smoothies with the kids and it simply stopped running. The lights still come on but are flashing and the machine simply makes no sound but the ...
Question about Kitchen Aid Kitchenaid 5-speed Ultra Power Blender Blenders 5-Speed Blender
...Blender KSB5WH3 flashing lights how to get to the fuse Have read solution for flashing lights and can not see the fuse along the red wire. I can not pull the motor out to clearly see all. So how does ...
...rare), these people may be able to order you one: http://kitchenaidblenders.co.uk/Home/tabid/36/c/KitchenAid-Blender-Spares/CategoryID/6/Default.aspx It needs a new fuse (or atleast the worked for
Question about Kitchen Aid Kitchenaid 5-speed Ultra Power Blender Blenders 5-Speed Blender
wont turn on,just blinking light This will probably need either a new thermal fuse on the field windings or a new motor. Where can I buy the thermal fuse?
blinking lights blender Probably open circuit motor. Locate and replace thermal fuse on motor windings or replace the motor. After you have proven the fault of course. Check with a meter.
Question about Kitchen Aid KSB560 5 Speed Blender with 56-oz. Polycarbonate Pitcher
blender won't start Test motor for continuity, if open circuit locate thermal fuse in windings and replace it. If not open circuit check cable for continuity, if that is ok you are likely looking at a
Question about Kitchen Aid Kitchenaid 5-speed Ultra Power Blender Blenders 5-Speed Blender
...blender with the flashing lights then you will need to remove the motor base cover and check the motor for a circuit. If it is open circuit then either replace the motor or locate the thermal fuse ...
Question about Kitchen Aid Kitchenaid 5-speed Ultra Power Blender Blenders 5-Speed Blender
...not turning on? Check the motor for continuity, it may be open circuit. If it is locate the thermal fuse covered with insulation tape on one of the field windings (where the metal clip is) Check that ...
Question about KSB560 5 Speed Blender
...Blender Not Working Remove the bottom cover (unplug the power first) and check the motor for continuity. If it is open circuit check the thermal fuse which will be taped over against one of the field ...
Question about KSB560 5 Speed Blender
...blender will not spin. Nothing at this point Remove the bottom cover 1nd unplug the motor from the PCB, check the motor for a circuit with your multi meter. If the circuit is open then remove the ...
Usually answered in minutes!
57 Questions
26 Questions
22 Questions