Questions & Answers for: Chevrolet Express fuel pressure

fuel pressure on fuel rail to ensure good fuel pressure according to specs for van. also check fuel pressure regulator look for fuel coming out of the vaccum line. if it is then replace it i just went

...fuel pressure . could this be the spider injector? Will it run for a short time if you squirt some fuel into the throttle body? If so, then concentrate on the fuel delivery system. Fuel pressure at ...

...What is this all about? i would replace the fuel filter sounds like it is got something maybe creating back pressure burinning up the pump sounds like a fuel pressure valve / servo

...fuel pressure sensor is located on the 2000 chevy express van. There is not really a fuel pressure sensor. There is a fuel pressure regulator. The fuel pump pumps up pressure and the pressure ...

...Fuel System Pressure. Raise and safely support vehicle. Remove Fuel Tank. Remove fuel sender assembly by turning cam lock counterclockwise. Remove fuel sender assembly from fuel tank. To Install: ...

...fuel pressure test was at 50psi and 54psi when throttling. Catalytic converter tested OK. Last error code says there was a misfire. CHEVY dealership told me bad cat converter but it is not it. please ...

...fuel pressure (fuel filter clogged, pressure regulator failure).One or more injectors restricted or pressure regulator has failed.HO2S element is contaminated, deteriorated or has failed.Vacuum hose ...

...fuel pressure sensor - Fuel Rail Pressure Sensor - Fuel Pump P0193 Description The Fuel Rail Pressure (FRP) sensor is a diaphragm strain gauge device in which resistance changes with pressure. The ...

fuel pressure regulator, how do you know it is fuel regulator starts every time , first turn of key, runs to 60mph , then acts like its is running out of gas, I let up off the gas and it stays running

...fuel pressure regulator located on a 2000 Chevy Express 3500 7.4 It's on the return fuel line at the end of the fuel rail. My info says, you have to remove upper intake manifold to get at it. If you ...