Questions & Answers for: Chrysler fuel mixture

...= Water (Head gasket, coolant, condensation)Hope this turn out to be very helpful Mike You can have a blowed head gasket, or a bad set rings. rich fuel mixture. you need to run a few test to find

Ad

MY CAR HAS BLACK SMOKE COMING FROM THE EXHAUST WHAT COULD IT BE. THE CAR ITSELF IS WORKING FINE. Black smoke indicates an extremely rich fuel mixture. Is your car fuel injected or carburated?

Ad

Question about 1994 LHS

1 Answer

...computer uses the readings from the MAF sensor to tell the injection system when to fuel the engine, and how much fuel the engine needs to have the correct air to fuel mixture to run

Question about 2002 PT Cruiser

1 Answer

...fuel mixture is too rich, but you already know it is running rich. A rich fuel mixture can be caused by a number of things First, I would suggest checking fuel pressure to make sure it is within ...

Question about 2002 PT Cruiser

1 Answer

...Fuel Mixture Ratio Self-Learning Control, the actual mixture ratio can be brought closely to the theoretical mixture ratio based on the mixture ratio feedback signal from the heated oxygen sensors 1. ...

...fuel mixture or the O2 sensor. The sensor on bank one is telling the computer the fuel mixture is too rich and the computer can not cut back on the fuel to make it switch to too lean. You would need ...

Question about 2001 Sebring

1 Answer

...is detonation caused from premature ignition problems causes are lean fuel mixture.--timing--map/maf sensor faults --oxygen sensors faulty-- crossed HT leads and low fuel pressure in the fuel ...

...fuel mixture during a cold start, the colder the engine the richer the fuel mixture retarded ignition timing causing the fuel to burn for a longer period of time makes the engine heat up ...

...174 engine is running fine how do i repair them Well code 171 is telling you the fuel mixture is too lean for bank one and code 174 is too lean bank two. So the most common cause is low fuel

fuel mixture correct are outside parameters and you need to know which ones to replace primary suspects are the heated oxygen sensor ( before the cat converter) the MAF/VAF sensors for air flow , BARO

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...