Questions & Answers for: Harley Davidson FXDBI Street Bob fuel gauge

Ad

Question about 2006 FXDBI Street Bob

2 Answers

Fuel Gauge reads empty all the time I took my gas tank off my 06 HD street bob. When I put it backon and plugged everything up my gas gauge read empty. I topped it off and it still read empty. I ...

Ad

...fuel gauge on a '06 Harley Street Bob. I am trying to replace the factory fuel gauge on my '06 Harley Street Bob because it is scratched. I purchased a new factory fuel gauge but I do not know the ...

Ad

Question about 2006 FXDBI Street Bob

1 Answer

Fuel Gauge stays on empty When I start the bike (02 Road King) the gauge comes up to the level in tank. After i drive away the gauge drops to empty and the low level light stays on. The gauge stays ...

Question about 2006 FXDBI Street Bob

1 Answer

...fuel gauge. your speedo is not sealed where it mounts as all of these items are triggered by the speedo also the thje gas gauge fogging is just typical has the tank or the guage units ever been ...

Question about 2006 FXDBI Street Bob

1 Answer

2009 Harley Davidson Fat Bob Motorcycle Problem: With the new flush mount fuel cap and gauge kit left hand side will not pop back up. What should i do? IS IT REALLY SUPPOSED TOO ON THE LEFT SIDE,

Question about 2006 FXDBI Street Bob

1 Answer

fuel gauge from the tank? Hi Troy, you could have a faulty sending unit or guage, there could be a problem with your wiring. On models with the fuel gauge posing as a left hand fuel cap the gauge is a

...fuel gauge works it stays on empty When the ignition switch is ON the fuel gauge is connected to 12 VDC, current flows through the gauge and the variable resistor in the fuel gauge sending unit to ...

Question about 2006 FXDBI Street Bob

1 Answer

...fuel sender unit on a 2008 street bob gauge only reads to the top of the low mark when tank is full, it goes all the way down when key is turned off Determine if it is the fuel sender that is the ...

Question about 2006 FXDBI Street Bob

1 Answer

...the sender unit from the mounting tabs and remove the sender unit but be careful not to bend the float arm while removing the sender because a bent float arm will give inaccurate fuel gauge

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...