...ft.lbs. step2 = additional 35 degrees. camshaft sprocket bolt = 18 ft. lbs. connecting rod cap = step 1 = 20 ft. lbs. step 2 = additional 70 degrees. crankshaft damper bolt = 74 ft. lbs. crankshaft ...
...and up where applicable. 1. Front axle nut 50-55 ft lbs. 2. Front fork slider cap nuts 11-15 ft lbs. 3. Front fork pinch bolt 30-35 ft lbs. 4. Rear axle nut 60-65 ft lbs. Good luck and have nice
lbs into Ft-lbs Divide by 12 to get the answer. 14FT. POUNDS your answer is 14 ft-lbs glad that i could help [url]http://www.onlineconversion.com/torque.htm[/url] To convert foot pounds to inch pounds
...Spindle nut. Tighten the nut to 185 ft. lbs. (251 Nm). Inch pounds is not an option, this critical torque spec is FT lbs. axle hub nut torque is 175 ft lbs.torque is in ft lbs not inch
...of torque to ft/lbs 162.5 foot pounds. 1950 in/lbs. divided by 12 = 162.5 foot/lbs. Here is a link to help you. ...
...foot pounds for the rockers the inch pound setting is 106 8.8 ft lbs. use your calculator. 106 divided by 12 Foot/ Pound Torque wrenches are not accurate that low, thats why its inch
what is 10 ft lbs in inch lbs 2003 Pontiac grand am lower intake torque in inch lbs 10 FOOT POUNDS = 120 INCH POUNDS THUSLY 12 INCHES IN A FOOT
...ft lbs Collector: 13-16 ft lbs You should use a torque wrench that is sensitive at low torques. I bought an "inch pound" torque wrench for delicate items like injectors and just convert the foot ...
Question about 1987 300ZX
...lbs achievable? Use an Inch pound torque wrench (very cheap to buy), then set it to the conversion of 9.5 ft pounds to inch pounds which is 114 inch pounds. Better check that torque setting again. ...
...housing bolt 71 INCH pounds, no ft lbs Water pump pulley bolt 15 Foot Pounds 1.4L motor; 71inch pounds and 16ft lbs Go library to ck you engine specs but most cars are about 15 ft lbs if steel ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions