Questions & Answers for: ft lbs 90 degrees

Question about 2002 Town & Country

1 Answer

...ft. lbs.) 45 (ft. lbs.) - 2 65 (ft. lbs.) 65 (ft. lbs.) - 3 65 (ft. lbs.) 65 (ft. lbs.) - 4 *90 (degrees) *90 (degrees) 429 Note *: Value is given in degrees. Turn the fastener this additional amount ...

Ad

...ft.lbs. Step 2- 90 degree turn Step 3- 90 degree turn 3.4L is: Step 1- 27 ft.lbs. Step 2- 33 ft.lbs. Step 3- 90 degree turn Step 4- 90 degree turn 4.5L is: Step 1- 27 ft.lbs. Step 2- 90 degree turn ...

Ad

...ft. lbs. Step 2: 59 ft. lbs. Step 3: Loosen completely then retorque to 22 ft. lbs. Step 4: 18-25 ft. lbs. Step 5: Plus 86-91 degrees ② 10-12 ft. lbs. plus 60-65 degrees or 28-33 ft. lbs. ...

ft. lbs. YearEngine Displacement Liters (VIN)Cylinder Head BoltsMain Bearing BoltsRod Brearing BoltsCrankshaft Damper BoltsFlywheel BoltsManifold IntakeExhaust Spark PlugsOil Pan Drain Plug 20012.2 (4

...ft lbs Step 2 : Tighten bolts 1,3,5,7 and 9 85 ft lbs Step 3 : Tighten bolts 1 - 10 Clockwise 90 degrees Step 4 : tighten bolts 1 - 10 an aditional 90 degrees Step 5 : tighten bolts 1 - 10 an ...

Question about Motor 2004 Sonata

1 Answer

...ft lbs. step 2 an additional 90 degrees step 3 another 90 degrees with new head bolts step 1 46 ft lbs. step 2 loosen all bolts step 3 14 ft lbs. step 4 an additinaol 90 degrees step 5 another 90 ...

...ft lbs. step 2 44 ft lbs. step 3 loosen all bolts step 4 21 ft lbs. step 5 additional 50-55 degrees bolts 11-15 small bolts 56-74 in. lbs 2.0L 4 cylinder step 1 29 ft lbs. step 2 58 ft lbs. step 3 ...

Question about 2000 Sentra

2 Answers

ft lbs. then turn 90 degrees, then another 90 degrees. initially install and tighten cylinder head bolts to 48 ft lbs. then remove all head bolts and oil threads. then torque all bolts to step 1 22 ft

...ft lbs for the cylinder head bolts on a 2006 3.3L caravan This is for 201 cubic inch--3.3L engine--engine code R. 1st step 45 ft lbs 2nd step 65 ft lbs 3rd step 65 ft lbs 4th step do not use torque ...

...ft-lbs) + 90 degrees + 90 degrees (in 3 steps of 90 degrees each) Main bearing cap bolts torque: 30 Nm (22 ft-lbs) + 90 degrees Connecting rod bolts torque: 25 Nm (18 ft-lbs) + 90 degrees Intake ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...