Questions & Answers for: kawasaki ZX-12R front fork

...problems such as tire outa balance also theĀ fluidĀ from the fork seal can cause the front breaks to swell if it leaks on them causing them to lock up this problem should be addressed soon as ...

Ad

wont stay in 2nd gear comes out when acclorating wont stay in 2nd gear comes out when acclorating you have a bad fork shifter ...first try fresh oil change and move shift lever down one notch to ...

Ad

Question about 2003 ZX-12R

1 Answer

...under bike, while oil is draining into pan remove left lower fairing and remove oil filter from front of engine. Replace plug and filter and refill, replace

Question about 2000 ZX-12R

1 Answer

...weave .had new tyre fited hi this may because of alligment problem. the specification of rear and front tyre diifers a lot then this problem may occur. you can allign you wheel in nearest work

well i bought the bike used when i got it. when goin to 2ng gear it would jump out of gear now its stuck in 6 gear. im thinkin the shift fork may be bent? A bent fork is highly likely. That's a real ...

Question about 2002 ZX-12R

1 Answer

...somewhere in the rear brake.tnx It sounds like the bike needs a new chain and probably new front and rear sprockets as well. The sprocket teeth should have a rounded blunt end. Do the ...

Question about 2003 ZX-12R

1 Answer

zx12 sprockets torque settings Front sprocket's mounting bolt: 127NmRear sprockets mounting bolts: 59NmRear axle pivot's bolt: 125Nm

...the brake & signal light not to work on a 2001 Kawasaki ZX-12R? The bike has led lights on the front & the led that were for the turn signals & brakes no longer work so I put new bulbs that ...

where is the nuteral saftey switch wireing Try removing the front sprocket cover most likely around there

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...