Questions & Answers for: front fork Cycling

...front forks must be torqued. The wheel seems to line up with the forks but the handle bars are no longer lined up with the fork and wheel. My questions are as follows: 1. How can I be sure that the ...

Ad

Question about 2000 FLHTCUI Electra Glide Ultra Classic

1 Answer

...front fender and denting it Bad fork seals, allowing loss of fork oil. Missing fork oil due to mischief or missing drain plug. Fork damping mechanism failure. Huge pothole. Too many wheelies. Broken ...

Ad

front fork seals need replacing Honda vigor FX650 Front fork seals need replacing , is a specialist tool required to take the forks apart ? Is it a very difficult job. hi non usd forks are ok thers a ...

Question about 2004 FLSTF - FLSTFI Fat Boy

1 Answer

...FRONT IS OF THE GROUND AND THERE IS NO WEIGHT PUSHING THE FORKS AND YOU NEED THE MANUAL TO SEE HOW MUCH FLUID GOES INTO THE FORKS EXAMPLE IT WILL SAY (13CM FROM TOP) THIS MEANS FROM THE TOP OFF THE ...

Question about 1998 VZ 800 Marauder

3 Answers

...front fork vertically without spring. ? Compress it fully. ? Pour specified front fork oil up to the top level of the outer tube.  Capacity (each leg): 490 ml (16.6/17.3 US/lmp oz) ...

Question about 1998 VZ 800 Marauder

1 Answer

...front fork seal are bad and need to be replaced. When you loose fork oil, your loosing suspension dampening and only riding on the springs.(POGO) Replace both front fork seals and dust caps, and put ...

Question about 2004 FXSTB - FXSTBI Night Train

1 Answer

...fork oil in the front forks to a heavier viscosity. I think Harley recommends Type E fork oil. I've found that PJB 30 wt. fork oil works best for me. Since I'm not familiar with the newer forks, I'll ...

Question about 2004 FXSTB - FXSTBI Night Train

1 Answer

...FRONT FORK OIL 1.18 REPLACING FORK OIL Replace front fork oil at every 20,000 mile (32,000 km) service interval and/or prior to storage. ALL BUT FXDX & FXDXT models Raise and support the ...

Question about 1996 VT 1100 C Shadow Spirit

0 Answer

...front forks are stiff or soft or not performing as required the usual suspects are: 1. Incorrect fork oil capacity. 2. Incorrect fork oil weight. 3. Incorrect air pressure. 4. Fork springs are worn ...

...Question edited for a lot more clarity, 'year make model', first 3 words! FRONT FORK Capacity: 0,13 litre. 20W Fork Oil. https://www.google.com/search?q=2010+piaggio+150cc+front+forks+oil+capacity

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...