Questions & Answers for: Suzuki front fork

...front right fork is rubbing the fork is bent i took every thing apart to get to the forks but i cant seem to get the foks off my ? is what do i need to do to remove the forks To remove the forks you ...

...fork head clamps for tightness. Check for shock action in the forks by holding the front brake on and pushing down on the bars--they should not bounce up and down when released. If they bounce or the ...

...Front fork oil capacity (each leg): 524 ml (17.7/18.5 US/Imp oz) NOTE: When adjusting the fork oil level, remove the fork spring and compress the inner tube fully. $09943-74111: Front fork oil level ...

...front fork vertically without spring. ? Compress it fully. ? Pour specified front fork oil up to the top level of the outer tube.  Capacity (each leg): 490 ml (16.6/17.3 US/lmp oz) ...

fork), remove front wheel (two bolts on bottom of each fork then wheel spindle), remove fender/mudguard (possibly four bolts), Undo the bolts that hold the forks into the lower yoke/triple clamp, undo

...front end when I'm going about 30 -40 mph. I've been told that it's fork oil but not sure it has oil in it as it's got springs. Any idea what it could be ? Maybe need the springs replaced? A wobble ...

...and limit the compression of the front forks upon rapid braking, , you maty need springs, seals and thicker fork oil its hard to say exactly what you have going on but its one or more of

What type of oil do I use for the front forks?I need to know the type or name of the oil for the front forks? take contact with Castrol! ASK- Castrol Fork Oil

...fork oil is required in the front forks of a 2000 suzuki 800 intruder and how do you measure if you put too much in. The guy at cycle gear where I bought the fork oil said to top it off or fill it up ...

...front forks? Can I use regular motor oil in the forks? The fork oil should come to just below the bottom of the threads of the bolt by the o ring. do not use regular motor oil as it doesn't have the ...