Questions & Answers for: KTM front fork

Question about 2002 640 LC 4-E Supermoto

1 Answer

front wheel slightly. Loosen your fork clamp bolts on the triple clamps slighty. Hold the front brake lever. Put one leg on either side of the front wheel to keep it from moving. Use the handlebars to

Ad

Question about 2002 EXC 200 GS

1 Answer

front wheel slightly. Loosen your fork clamp bolts on the triple clamps slighty. Hold the front brake lever. Put one leg on either side of the front wheel to keep it from moving. Use the handlebars to

Ad

Question about 2004 EXC 250 Racing

1 Answer

front wheel slightly. Loosen your fork clamp bolts on the triple clamps slighty. Hold the front brake lever. Put one leg on either side of the front wheel to keep it from moving. Use the handlebars to

Question about 2000 MXC 250

1 Answer

front wheel slightly. Loosen your fork clamp bolts on the triple clamps slighty. Hold the front brake lever. Put one leg on either side of the front wheel to keep it from moving. Use the handlebars to

Question about 2004 MXC 300

1 Answer

front wheel slightly. Loosen your fork clamp bolts on the triple clamps slighty. Hold the front brake lever. Put one leg on either side of the front wheel to keep it from moving. Use the handlebars to

Question about 2005 EXC 525 Racing

2 Answers

Front fork oil change. Hi, I trid to take off the top parts of front forks KTM 525 EXC 06 First, I could loosen the top parts but they became very tight and stop at end. Should I keep doing with more ...

...front fork & spacer Should there be a spacing on the right side between front fork & spacer sleeve? If so, how much? front axle installation: looking at the front of the bike: slide the wheel ...

Question about 2004 EXC 200

2 Answers

...front wheel out of the forks and use the socket wrench to remove the caps on top of each fork leg. Use the Allen wrenches to remove the mounting clamp bolts on either fork leg and then slide the fork ...

Question about 2004 EXC 200

1 Answer

...fork stubs Front axle pinch bolts 10Nm 7ft lbsCollar nut, rear wheel spindle Rear axle nut 80Nm 59ft lbsHex nut swingarm bolt Swingarm nut 100Nm 74ft lbsHex collar screw handlebar clamp Upper ...

Question about 2005 250 SX

1 Answer

...fork oil is used in front forks the SX forks really should be taken to a suspension tech to get the inner chamber properly bleed out. You never just add a cc amount because there is usually some left ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top KTM Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a KTM Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...