Question about 1992 CB 750F2 Seven Fifty
fork leg where the spindle fits. You just needed to.... remove front wheel, support bike on something, undo retaining bolts on forks, tap out fork legs from the top, using a soft mallet. Take out fork
front fork leaking oil from bottom of the seal. Need to know how to replace seals and add new oil. How much fork oil? need to replace front fork oil seal change the oil seals and oil in the fork,and ...
...of oil in front forks to Honda VT 750 Black Widow. Mod 2003 Recommended fork fluid:Pro-Honda Suspension Fluid SS-8 Fork fluid capacity/level:474 ± 2.5 cm3 (16.0 ± 0.08 US oz)/100 mm (3.9
front fork seals need replacing Honda vigor FX650 Front fork seals need replacing , is a specialist tool required to take the forks apart ? Is it a very difficult job. hi non usd forks are ok thers a ...
Question about 1997 CBR 900 RR Fireblade
...fork length.If they are are the same,bolt them on.Best if you have the entire front end with wheels brakes etc as its less work to do.Different part no's is the springs and valves in the forks that ...
...front wheel and axle and put a pie tin under the fork tube. Reach up into the bottom of the fork tube with a hex key and loosen the screw but do not remove. Now take the air pressure cross over tube ...
...front fork to a convensional spring fork and what forks would be the best ? Hello and thanks for the question, Your 1982 GL1100 has air assist type of suspension. It has springs in the front as well ...
...front brake and try to compress the forks. This should align the forks. Tighten the pinch bolts. Check forks again. If you still have problems someting is wrong like bent fork tube or slider, ...
...front fork covers is dented in causing the front forks not to move. He claims that the fork is not bent and all I would need to do is take the fork out and replace or bend the cover. I guess im just ...
...front forks are stiff or soft or not performing as required the usual suspects are: 1. Incorrect fork oil capacity. 2. Incorrect fork oil weight. 3. Incorrect air pressure. 4. Fork springs are worn ...
Usually answered in minutes!
188 Questions
186 Questions
195 Questions
148 Questions
151 Questions