Questions & Answers for: Chevrolet Corsica front ecu

Question about 1994 Corsica

1 Answer

...to left or left to right? The coils should be numbered, and the cylinders will be numbered from the front of the engine back (the front being where the water pump is, generally the left or passenger ...

Ad

the front door handls are not openinig the front doors,and if I fiddling with handle lifting up and pushing in at the same time it will release and open.do I need to replace the handls or is there ...

Ad

...for a 1988 4 cylinder chevy corsica For the 2.0L: Firing Order: 1-3-4-2 Cylinders: 1---2---3---4 (front of vehicle) Ignition Connections: ----[4] -------[1] ---------[3] -----------[2] (front of ...

my wheels in the front shake when going 40 mph what wrong with it? check your tires for balance, the check the bearings inner and outer, and the front end links to make sure you have no ware and tare.

Question about 1994 Corsica

2 Answers

...153624 or 142536 2.2L or 2.5L 4cyl's 1-3-4-2 2.8L or 3.1L 6cyl's 1-2-3-4-5-6 Coil packs on 2.2L front to rear are 2 / 3 , 1 / 4 Coil packs on 2.5L front to rear are 3 / 2 , 4 / 1 Coil packs on ...

Question about 1994 Corsica

1 Answer

...Switched 12V+Yellow GroundBlack IlluminationGray DimmerBrown Antenna TriggerPink AntennaRight Front Front Speakers4" x 6" Kick Panels Left Front (+)Tan Left Front (-)Gray Right Front (+)Light ...

...order for 1992 Chevy Corsica - 3.1 - 6 cylinder the firing order is 1-2-3-4-5-6 As you standing in front of the vehicle the coils from left to right are 1-4-6-3-2-5 the rear cylinders from left to ...

Question about 1988 Corsica

1 Answer

Reset computer After reconnecting the battery cables, what is the sequence to reset computer take a ecu remap tool at http://www.careucar.com/wholesale/ecu-chip-tunning-tool/?

Question about 1988 Corsica

2 Answers

engine swap Did an engine swap from a Cavalier I believe 97? Into a 95 Corsica. Corsica was an obd1 the Cav engine is an obd2. Should the computers be switched as well? Before the other engine crapped

Check: - Pull up the ABS diagnostic error codes. - Brake hose attached to the caliper for swollen or clogged. - Check brake pipe from the skid control ECU to front wheel. - Check the caliper assembly

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...