...front brakes system? Just take your old line off and replace it with the new line. Be careful because the brake fluid will damage your paint if it's DOT 4. One you have replaced the brake line, fill ...
front brake applied and disappears completley when bike/brakes warmed up after about 1km. Pad thickness is about 2mm-both of them I your pads are only 2mm (0.080") thick, you are due for some new pads
...front brake master cylinder to see if it's got brake fluid in it? If it does, try bleeding the brakes. If that doesn't work. You've got a major problem with the master cylinder and you ...
brake light stays on all the time There are two brake light switches on your bike. One for the front brake and it's located in the right handlebar switch housing and a pressure switch that is ...
i have a 2007 fatboy and i want to know how many ounces to put in the front brake system? please help There is no specified amount to put in the front brake master cylinder. I usually put the bike on ...
how to remove the front caliper on 93 fatboy? new brake pads are dragging; how do I remove the caliper to examine? Hi Anonymous, for more information about your question please visit the websites ...
...brake light staying on Break light staying on and need to hock up turn signals Hi Anonymous, your front brake lite switch button is probably not getting pushed back into the off position. Remove ...
...brakes lights are not working on my 1993 Harley fatboy neither with front brake lever or back brake pedal Check the wiring underneath the rear fender for damage especially if you are running a wider ...
why wont the brake lights not work on my 1993 fatboy brake lights not working neither front or back what and how can I check? Check the wiring under the rear fender for damage. Check the bulb by ...
Usually answered in minutes!
194 Questions
152 Questions
134 Questions
13 Questions
12 Questions