...for a replacement part number for the 'front fork upper bracket' aka triple tree top for an 07 883R Sportster. Pg 2-87 in service manual lists it as part #6. 45966-04, fits all the 07 XL
...ground remove brake cal. wire it up out of way.then remove front fender.loosen axle nut and remove and remove wheel then loosen pinch bolt on the thriple trees hang on to fork tubes they may slide ...
...of the front forks on my 2009 Sportster. But now I am concerned about tightening the bolts properly. how much should I stress on getting them really really tight? dont stress,,,,,,, torque em to 65 ...
...arm I assume you're working on an Evolution or a Twin Cam and you're talking about the torque specs on the lower plate. 5/16" bolts 15-18 foot pounds 1/4" bolts 10-13 foot pounds Hope this helps ...
...tension with both of the adjuster bolts about the same length. Measure both of them. This keeps the wheel aligned properly in the swingarm. Torque the rear axle to 60 foot pounds. Good luck ...
front axle tourque for 2006 883 sportster Hi Anonymous, 50-55 ft lbs. Good luck
harley torque specs Front axle torque specs 2007 XL = Axle (front) pinch screw 21-27 ft-lbs 28.5-36.6 Nm Axle nut, front 50-55 ft-lbs 68-75 Nm
Question about 2004 XL 883 Sportster
...front of the axle housing on both sides. The distance must be within .062 in. (1.6 mm) on each side. THEN turning the adjustment screws until the measurement is within specification. You will reduce ...
Question about 2007 XL 883 Sportster
torque specs -fluid capacities and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Harley, despair not, for a mere zero $0
Question about 2007 XL 883 Sportster
...Torque specs. - Harley Davidson Forums harley-davidsonforums.com https://www.harley-davidsonforums.com > threads > t... Aug 23, 2013 - Does anybody know the torque specs for the rocker box on a 2011 ...
Usually answered in minutes!
138 Questions
133 Questions
56 Questions