Questions & Answers for: GMC Jimmy front axle torque specs 07

...GMC Sierra K-1500. Have a very severe shake during driving. Does not happen all the time. Speed limits vary, but usually around 30 to 40 mph. Checked motor mounts,, trany mounts, and rims. All good. ...

want to know what the torque specs are for the idler arm, pitman arm and bearing hub and tie rods? for a 1998 gmc envoy 4x4 automatic 2000 gmc jimmy front cv axle nut (36 mm) torque ratings?

...torque specs, my lower TRW ball joints came with specs, would the mounting bolts be the same torque as the lowers, and what about the main nut itself... 1996 jimmy 4x4. mounting bolt torque would be ...

...torque spec for the crank pulley bolt on a 95 gmc jimmy? never torqued down to specs, could that be the reason it falls off after a month or two of driving? The torque is 70 lb. ft. Before ...

...front half shaft nut/ lock nut/axle nut- is. its probably a 33mm thats the only special tool you will need. Unscrew it, take your outer tie rod off the spindle/steering knuckle, theres 3 bolts behind ...

I need the torque specs and torque sequence for my 1997 GMC Jimmy if you donot have a shop manual go to library reference section and copy info from the professional motor manual under engine specs.

...TORQUE SPECS FOR A CRUSH SLEEVE ON A 2000 GMC JIMMY There is no spec for that. the sleeve must be compressed until you have the correct pinion bearing preload. The pinion must take 3-5 inch pounds of ...

what is the torque setting on a gmc jimmy 1999 front wheel hub 36mm nut. the torque for the outter axle nut at the wheel for a 1998 gmc jimmy is 103 ft lbs. hope this helps.

...GMC Sierra 1500 both front brakes not releasing after letting off brake look at your front brakes you have a brake caliber, on it you will see a piston that pushes your brake pads in when you apply ...

...Front Axle is a genuine original equipment outer axle stub shaft for all GM 10 Bolt front axles in 1977 to 1991 Chevy Blazers, GMC Jimmys, and Suburbans, plus Chevy, GMC 4x4 1/2 ton and 3/4 ton ...