I replaced my front axle bearings and need the torque specs for front axle bolts call your local dealer and ask for service department. they can get that torque spec for you
...valcan classic 800 I need the torq spect for the front axel. I have a 1500 vulcan, on my bike its 60 lbs. According to the Kawasaki Service Manual the torque specs for the front axle is 65 ...
Front Axle: 78 N·m (8.0 kgf·m, 58 ft·lb) Left Axle Clamp Bolts: 20 N·m (2.0 kgf·m, 14.5 ft·lb) NOTE ○Tighten the two clamp bolts alternately two times to ensure
...Manual, the Front Axle Bolt should be torqued to 16 ft.lb for the pinch bolts 58 ft.lb for the front axle and in case you need it... 33 ft.lb for front caliper bolts 14 ft.lb for front rotor ...
front axle on a kawasaki zx6r 2008 75 or 80 ft.lbs. i think no its 94 ft/lbs rear axle nut 94 ft/lbs front axle nut 14.5 ft/lbs front axle clamp bolts , the pinch bolt's that hold thefront axle, there
spec for front axle bolt, front axle pinch bolts and front brake caliper mounting bolts. What lubricant goes on the front axle when being installed take 25.00 and buy you a repair manual..its worth it
...Front axle = 80 ft/lb Front axle clamp bolt = 15 ft/lb Front axle caliper mounting bolts = 25 ft/lb Front Wheel Removal: 1. While the bike is still on the rear stand (but before putting it on the ...
Question about 2004 VN 1600 Mean Streak
...torque specs 2014 Kawasaki 250 f torque specs on the cylinder head @ Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the ...
torque specs for rear axle zx12r Front and rear axel nuts are 125 N.m, 13 kg.m, 94 ft.lb
...axle nut..front calaper bolts ...thanks Axle nut 145 Nm rear sprocket nuts B and C models 74 Nm rear sprocket but E and F models 59Nm front sprocket nut 125 Nm front caliper mounting bolts 34Nm Hope ...
Usually answered in minutes!
239 Questions
197 Questions
175 Questions
157 Questions
126 Questions