Questions & Answers for: fried the motor on vacuum

Question about Numatic "" Canister Vacuum

1 Answer

...vacuum cleaner. can i plug it into my home supply of 240 volts without using an adaptor? or can i flick an internal switch to change it? the answer is no to both questions. you will fry the motor as ...

Ad

Question about 431BX Bagless Upright Vacuum

2 Answers

Motor Fried? Eureka 431BX Vacuuming, and then all of the sudden the motor just stopped. Well idk if it's called the motor; the beater bar still spun, it was just the fan that stopped spinning Here is ...

Ad

Question about E series Canister Wet/Dry Vacuum

1 Answer

...and still nothing. Leave it unplugged for a half hour then try it. But it sounds like it may have received a power surge or several. This could have fried the motor. The motor may have to be

Question about F7431-900 SteamVac Vacuum

1 Answer

...spin brushes it is most likely the motor is fried if you smell something burning it could be jammed or the wires have be shaken off the motor terminals. for it not turning off you need a new

Question about Lux 5500 Canister Vacuum

1 Answer

...power vac has stopped working - pushed reset - is there a fuse somewhere and/or how to you replace the on/off switch? it could be that your motor has fried or the wires on the motor have come

Question about 1697-7 Powersteamer Pro Deluxe Vacuum

1 Answer

Have emptied tank, rinsed tank, checked belt, checked brush and still nothing. Have even changed outlets. Suggestions? the motor could have fried or the wires have been shaken off the motor terminals

Question about F5858-910 SteamVac Vacuum

1 Answer

wont power up first in could be that your power cord has been bent and twisted too much and the wire has broke inside the cord or the wires could have come off the motor or the motor could have fried.

Question about F5858-910 SteamVac Vacuum

1 Answer

my Rainbow vacuum e series will not turn on. Has been working fine and now it will not come on. either your cord broke inside or the connections on the motor have come loose or your motor has fried.

Question about Carpet Cleaner Powerbrush Deep Cleaner Vacuum

1 Answer

drive shaft won't turn , motor makes lots of grinding noise and burning smell Sounds like the motor is fried.

lot of sparks coming from the motor. could it be that the motor has fried or is there brushes to the motor need replacing if thats possible You will need to replace the motor, nothing else causes this

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Anonymous

Level 3 Expert

43501 Answers

Are you a Vacuums Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...