Question about 1989 GSX 600 F (Katana)
how much oil goes in the forks once you change the seals This is all I can find....1988 1988. 460 cc (15.5 US fl oz, 16.2 Imp fl oz) could b the same.......
gsxf 600 fork seals are leaking 1988 gsxf 600 fork seals are leaking whats is the replacement part number and how do i replace the seals Get a manual as you will be in over your head if you haven't ...
...Does anyone know what the cause and solution? Thanks! Most likely a broken or stuck shifter fork. Unfortunatlly you'll have to take the entire engine and transmition apart to find
I'm installing lowering links on my 00 Katana 600 first time doing something like this. Do I need to adjust rear shock and front forks? What is the best way to do this. Thanks To complete lowering ...
how do i replace the fork seals and what type how much fluid do i put in once the seals are in place. If this has USD forks and you've never done forks before, please dont atempt to do them...If you ...
sagging fork springs You may have an air adluster, schrader valve with which to add air pressure, or there may be settings on the rebound and damping settings, are the fork seals leaking oil at the ...
...are boucning around or somthing, the shifts sometimes buck as well, You may have a shift fork or two starting to go bad. When a fork gets bent, it does not move the slider gear properly. ...
Question about 2003 GSX 600 F (Katana)
Are 01 Suzuki Katana 600 forks compatible with a 2003? Yes, they are compatible.
Question about 1990 GSX 600 F (Katana)
how to fix a bent shift fork in a 1993 suzuki katana 600? Replace with good used, straighten to the original shape or order new from eBay, or thefind.com
Usually answered in minutes!
91 Questions
56 Questions
52 Questions
49 Questions
43 Questions