Questions & Answers for: fork leak Cars & Trucks

Question about 1993 190

1 Answer

...master or slave... depress the clutch pedal while someone under the hood watches the release fork on the transmiison make sure it is completly disengaging the clutch you can also use a plybar ...

Ad

Question about 2000 156

2 Answers

forklift hydraulics the forks are raised up and left sitting on something and the hydraulic lift slowly over a day or to slides down but the forks stay sitting up, was just wondering whether or not ...

Ad

fork engaging slave cylinder from tranny. (91 3000GT, mitsu) So I posted a week ago that I was having trouble with my mitsu 3000gt sl (91) manual clutch. I thought it was the slave or master cylinder,

Question about 1990 K1500

1 Answer

...shifting the clutch went to the floor, there was no pressure. What could of happened? The clutch fork may have slipped off of the throw out bearing or broke. Separation of the transmission from

...bleed screw, which itself was not leaking anywhere, pumping the pedal had no effect on the swing fork/arm. I expected some movement in the arm as the pedal forced the slave piston out, but there ...

Question about 1984 Pickup

1 Answer

leak of fluid to the clutch master or slave cylinder check the footwel drivers side for a damp carpet or underneath the car for for any new leaks check the fluid level of your brakes and clutch as the

...but pushing on the pedal will not work. If you have a hydraulic clutch (slave cylinder to clutch fork) try bleeding it.if it leaks you will have to replace it> If it is a manual clutch fork and ...

...fork most important but also need quadrant assembley I suggest you check for fluid in the resevoir as it sounds as if the slave cylinder developed a leak and lost the fluid. Clutch forks seldom if ...

...cylinder and slave cyl for leaks
if not leaking or bypassing
these are known for clutch fork problems
note it is in the clutch kit
and no other reason to explain the poor clutch ...

...leak due to the pump rubbing a hole in the case. While I had the case disassembled, I also replaced the range shift fork, the hi-lo range hub associated with the fork, the mode shift fork, the chain, ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...