Questions & Answers for: forget default settings

...forget that. do you have.. DWL-P200 or DWL-P50? should say on the box........... Address to enter router setup is 192.168.0.1 If you have not changed the default settings: Username is admin Password ...

...you can also hold down the reset button on this Wireless Access Point?s panel for more than 10 seconds to reset its default settings back to factory default. Please don't forget to rate me! ...

...key for Westell 7500 that I forget or reset? If you reset you have to use the default settings---on most routers the default setting is unsecured. Reset the router and re-set a new security

...BIOS for this. The easiest way is to remove the battery from the motherboard for about 5 minutes. Put it back and the CMOS should be back to default value Don't forget to rate this answer if it ...

...forget or lose your password, you'll need to "restore to factory default". This will reset the password to its default, as well as erase any and all other settings you may have changed. ...

...If you forget or lose your password, you'll need to "restore to factory default". This will reset the password to its default, as well as erase any and all other settings you may have

...If you forget or lose your password, you'll need to "restore to factory default". This will reset the password to its default, as well as erase any and all other settings you may have

...If you forget or lose your password, you'll need to "restore to factory default". This will reset the password to its default, as well as erase any and all other settings you may have

...your phone manual for default code. If u forget it. Go to your nearest searvise station and flash your phone. Note. Flashing phone will delete all datas including

...forget or lose the lock or security code, try first the default lock code 12345. If the default code is wrong then the it is best to get in touch with Nokia support as the memory within must be ...