Questions & Answers for: ford van power steering

...van power steering pump I have changed my power steering pump twice (secondhand) but it is still leaking on my disc brakes ,could it be something else like a valve on the steering rack or should i go ...

...van turning left or right. Noise started when turning to left but now does in both directions and is getting louder. What partis causing noise? This is caused by the power steering pump, the only way ...

...ford freestar van, re hooked everything back up, but can't get air out of lines, and the steering is very hard. Also i was told not to use power steering fluid in reservoir, but to use transmission ...

...ford escort van 92 has power steering pulley on ford escort van 92 has cracked how do i remove the pulley you will need power steering pully puller you can rent them at most of your local part house ...

...van the belt slip out so we checked all the pulleys and found that the power steering pulley is loose so we think thats whats causing the belt to slip now we need to figue out how to take out the ...

What type of power steering fluid should i buy? 1987 ford econoline van. Hi, Go to a auto parts store and tell them the year and model of your van. They will give you the right stuff to buy. Good luck

Ford E-350 Van steering problem The steering in my 2006 Ford E-350 Super Duty Passenger Van suddenly got tight (literally over night) and it won't return to straight after a turn. The power ...

...ford econoline van will not start no power, brand new battery. power is being drawn to the distribution block Check the master electrical ignition switch mounted on the steering Colum. It sounds like ...

...ford e150 Sometimes, before you hook up the pressure hose, you need to prime the steering box with power steering fluid. Then, when the van is running and the pump is full turn the steering wheel at ...

...Ford E150 convertion van? While I was driving there was a loud grinding noise, followed by a squeeling noise. At that point I lost all power steering. possible pump seized and it was the belt making ...