Questions & Answers for: ford focus throttle body

Question about 2000 Focus

2 Answers

ford focus 2000 1:8cc can you tell me where the tps sensor is and how to do it,mine has a throttle cable,did yours Throttle position sensor is on the throttle body, on the opposite of the throttle ...

Ad

...ford focus se read p1120. already replaced the throttle position sencer but still shows p1120 code does your engine idle fast or slow? You may need to clean the idle selonoid or the throttle body. ...

Ad

Question about 2000 Focus

1 Answer

...FORD FOCUS, BUT HAVING A PROBLEM LOCATING IT. PLEASE HELP BEFORE MY BOYFRIEND MESSES UP HIS CAR. :) It should be on the side of the throttle body, locate the air filter then follow the tube from air ...

...ford focus look like I suggest you google 05 ford focus throttle positioning sensor. This sensor keeps you air intake throttle at the proper position when the engine is cold and changes position when ...

...ford focus not accelerating when gas pushed Is engine light on dash? It could be TPS switch (throttle position sensor) on throttle body on engine. Check for fuel , check exhaust for blockage (cat. ...

...ford focus 2.0 with a etb scanner says throttle stuck closed AND throttle stuck wide open, accel pedal completely inop. car has no throttle what so ever but sits there and idles just fine You will ...

ford focus stoping at idling every time what problem Restricted air flow. Replace the air filter if dirty. Clean the throttle body and MAF sensor. I use brake clean. Use a tooth brush on the throttle ...

Ford Focus 2.0L The throttle body bore must be spotless. It tends to build carbon at the chamber where the throttle plate touches at the fully closed position. After you solve that cleaning issue, use

...Ford Focus throttle body issue My car started to rough idle, when I go to press the gas pedal there is no rev or acceleration or anything. It came up with a code for the throttle body and had it ...

Question about 2007 Focus 1.6

1 Answer

ford focus zetec 2007 throttle body 6 pin socket to wire into existing loom ( Colour Code Of The Loom ) Pin 1 - Signal (Green/Yellow) Pin 2 - Signal Return (Grey/Red) Pin 3 - Signal (Orange/Red) Pin 4

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...