Questions & Answers for: ford focus spark plugs

Question about 2001 Focus

1 Answer

Ford Focus, 2.0 liter Automatic, I am changing the spark plugs, I mixed up spark plugs for two vechiles.. I bought them at wal-mart, I need to know what size my spark plug is, and what to gap it at. 2

Ad

...spark plug settings for a 1.8 zetec engine what are the spark plug gap settings for a ford focus 1.8 zetec you can set the gap by using the new spark plug casing papar thikness.try it and it will ...

Ad

...Ford Focus ZX3? I was wondering if anyone knew how to remove spark plug wires from spark plugs on 2000 Ford Focus ZX3? two options just pull them straight up or they make a special tool that you can ...

...ford focus ? get a plug spanner (more a socket than a spanner) and after removing the plug lead, use the spanner to remove the plug. Do one at a time so you dont get the leads mixed up or it will not ...

Question about 2001 Focus

3 Answers

...Ford focus how do tell if my 2001 ford focus is an DOHC or a SOHC lol, I never knew they made a sohc focus, 99% of these are zetecs DOHC. so they have the spark plugs down the middle of the ...

Question about 2005 Focus

1 Answer

...Ford Focus open the hood go to the spark plug wires ang get a socket wrench twist them off make sure you get the rite new spark pluges make sure there gauged rite to be gauged it is the distances the ...

...ford focus. CHANGING SPARK PLUGS EASY.ALL YOU NEED IS SPARK PLUG SOCKET.TORQUE WRENCH WOULD BE GOOD.NOT MANDATORY IF YOU MAKE SURE NOT TO OVER TIGHTEN SPARK PLUGS STRIP OUT THREAD SINCE THEY ARE ...

oin in spark plugs. ford focus 1.6 1999 sounds like the spark plug tubes are leaking oil onto the plugs, renew rocker cover gasket and plug tube gaskets.

ford focus lynx ghia 1.6l gas? It really depends on the spark plug being used. But if you stick to the origninal spark plug NGK TR5A-10 it is supposed to be gapped a 1.0 mm since Ford has issued an in

...ford focus cranks wont start has fule and compression Check for spark. Remove a spark plug and attach the wire back on, then hold the plug against the engine block and have someone crank the engine. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...