Questions & Answers for: ford focus rear brakes adjustment

ford focus 1.6 3 door year 2004 The tightness of the handbrake is a function of the adjustmnent of the rear brakes. If the rear brakes are working properly, the handbrake adjustment will be correct. I

...ford focus zts my bearings were going out on my focus, i purchased two new drums with bearings already in them ,had to force one on the on the second one i realized that the self adjuster wasn't in ...

...ford focus 1999 The hand brake hardly ever needs ajusting. See your hand brake mechanincly spreads your rear brake shose inside the drum. Therefore just replace your rear shoes and make sure there ...

Ford Focus parking brake sets but will not keep the car from rolling. remove rear brake drums ,slacken handbrake cable then clean lip out on drum with a small angle grinder then manually adjust brakes

...ford focus rear brakes how come i cant get the drum to go back over the new brakes? with a small flat head screw driver at the back of brakes there should be a adjusment nut turn one and half turns ...

how do you adjust rear brake shoes on a 2001 ford focus. The rear drum has to be removed to adjust. Remove the dust cap and the attaching nut Adjust the lever ouward to expand the shoes.

...ford focus and I cant get the rear drum off the back IF IT IS DRUM BRAKES,YOU WILL HAVE TO GO BEHIND THE REAR DRUM AND ADJUST THE BRAKES TO ALLOW YOU TO REMOVE DRUM,PROBABLY A SPRING OR A ADJUSTER IS ...

...ford focus has a loud kocking noise from rear when breaking my 2010 ford focus makes a loud knocking noise almost like someone is hitting the underneath of it with a sledge hammer. This happens at ...

...ford focus. I can turn the rear wheel by hand when the brake pedal is being applied. i was having a hard time adjudting the parking brake, worked that out (sort of).when I had the car on the hoist I ...

...Ford Focus 1.8 2006 watch the video and try to contact a person who is expert in your car. thanks. Harry, Try adjust up and service the rear brakes first and make sure all hardware there is good and ...