Question about 2002 Ranger Regular Cab
Ford Ranger makes a clunk sound on tight low speed turns after coming out of a turn and sometimes one of the wheels will lockup for a second or two on tight parking turns - manual tranny/differential,
...CV joint? Easiest approach is to change entire axle. Depends on car, but generally remove wheel, remove axle nut, loosen lower ball joint and separate wheel assy from a-frame. In some cases, tie rod ...
...axle inner cv from diff does it just leaver out The inner joint (the one in the transmission) has a retaining clip which makes it a little difficult to remove the axle. The easiest way to get it out ...
...cv joint in the front axle? At the transmission end there should be a groove in the shaft and a ring that rides in it. When the proper pressure is exerted it will collapse into the groove and allow ...
...ford ranger 2 wheel drive A two wheel drive ranger does not have any c.v. Joints. It does have u joints in the rear drive shaft. Worn out u joints can cause vibrations at highway speeds, squeezing ...
...ford ranger cv axle popping out when going down the road the front left cv axle keeps comming out and making a grinding noise, almost like its not held in by something that should. i can wiggle it up ...
Usually answered in minutes!
642 Questions
645 Questions
573 Questions
562 Questions
558 Questions
