Questions & Answers for: foot bar

Question about Brother Sewing Machines

1 Answer

...foot on the presser bar and make sure that the lever of the foot rests upon the needle bar thumbscrew. While holding it in place, fasten the foot to the presser bar with the screw. As the needle bar ...

Ad

...bar of the darning foot is above the needle clamp and put the screw back on and tighten. As the needle bar raises and lowers, the foot will hop up and down slightly. Make sure that you always lower ...

Ad

Question about 2007 Mechanical Sewing Machine

1 Answer

...onto the needle plate under the pressure foot bar and lower the pressure foot bar down onto the foot, lining up the base of the foot holder with the little bar on the foot, it should click into

...push it toward the foot holder bar & it will release the foot & you put the other foot down on the needle plate & bring the foot holder bar down on the foot until it snaps on to the ...

Question about CS6000i Computerized Sewing Machine

1 Answer

foot bar is tight, and the foot can still be moved, it is likely that the presser foot bar has become loose within the lifting mechanism. You could save yourself some trouble by taking your machine to

...bar to the walking foot on my Simplicity Quilters Classic? The manual doesn't show how to do it I can't figure out how to attach the quilting bar to the walking foot to quilt There should be a hole ...

Question about Quilter's Classic SW240 Mechanical Sewing Machine

1 Answer

...foot bar as far up as it will go and that the foot is tilted slightly to slip in on. If you have a knee-lift bar, using it to lift the presser bar will sometimes give you just what you need to get it ...

Question about Quilter's Classic SW240 Mechanical Sewing Machine

1 Answer

...bar to the foot which doesn't seem possible with what I located. However, you may be able to attach a bar or a guide of some sort using something like masking tape that can be used as a guide. On a ...

Question about Quilter's Classic SW240 Mechanical Sewing Machine

1 Answer

...foot bar and on the presser foot. Perhaps something has become loose, fallen off, or become damaged. Have you tried a different presser foot and, if so, does it work? If more than one presser foot ...

Question about Quilter's Classic SW240 Mechanical Sewing Machine

1 Answer

foot. On the super-high bar shank feet, you must push down the presser foot lock to detach the foot. See page 23 (page 24 of the PDF) of the manual for the presser foot attachment details. Sears Parts

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Cindy Wells

Level 3 Expert

6688 Answers

Brad Brown

Level 3 Expert

19187 Answers

SmartAviator
SmartAviator

Level 3 Expert

1124 Answers

Are you a Sewing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...