Questions & Answers for: Mitsubishi fog light fuse locater

...fog light works when i tun it on on my passenger side Brake light, Running light will not work on passenger side, after new speakers installed. Fuse is not blown, unless there is another fuse. 2000 ...

...fog lights to my 2000 Montero sport. I must have blown a fuse. The dome lights and reading lights do not work now. I looked up the fuse (5 amp) in the oweners manual, but when I opened the fuse box ...

...for power do this where you plug in your bulb is no power then trace wires testing in the wires periodically to check for broken wires if everything checks out fine next check the fog light

...fog lights to work. the fuse is fine, and the bulbs are fine. what else can i check? I recommend you check the fog lamp relay. I believe it's located in the engine compartment inside a plastic box ...

...lights not working turn signal relay' high beam relay' fog light relay '' locate in engine compartment fuse box check all of thse you should find the problem'' and dont for get to check the bulbs ...

box label is missing. I need to know which fuse operates the parking/fog lights. This is in the engine compartment. Take a look at it. There is one there for your fog lights...bottom rom...15 amp fuse

...fog light, but on the drivers side there is not one, can use the same cables connection with extension to connect together the drivers side with the passengers, any advice would be grateful.... Thank ...

...both fog lights have suddenly become inop. When turning fog lights "on", the GREEN IND LIGHT comes on, relay clicks, but no lights come on. 15A fuse in the nbr 6 position is good. ...

Hi, I just purchased fog lights for my 2007 Mitsubishi Endeavor and I installed them already but I don't know the necessary steps to get the fog lights turned on. Can you help? fog lights have to be ...

...light on dash is not on and if I have fog lights on and try high beams the fog lights stay on, the fuses are all good I would test the headlight dimmer switch to see if the high beams are being ...