Questions & Answers for: flush buttons

aquarius wd420 1200 spin Hi My machine is just flushing the on/off button and flushing the drying high/reduce creases also flushing. how can i reset the machine? thanx Flushing all button something ...

...flush buttons (not sure of the technical terms) inside the tank and now it flushes properly. It seems that the 2 plastic poles the extend from the faux chrome buttons are just a bit too short. Hope ...

flush buttons follow the instructions below: Most common problems are: Green & Grey rods are broken that connect the buttons to the flushing mechanism - if so you can temporary fix by using wooden

...of two buttons in the top to flush. The small plastic part to which the button fitting is screwed and through which 2 thin plastic poles pass to activate the flush has snapped. Can I replace this? ...

Flush button won't work. 12 yr old Duravit Toilet We have a 12 year old duravit floor mounted toilet. The toilet won't flush when the button is pushed. When you push the button, a little bit of water ...

...buttons full and half flush are. The half flush does not do a half flush bitit does a full flush! It's not nessesarily a half flush just as little water as is possible for that toilet. The full flush ...

I have a push down flush system toilet in which there is a piece of plastic which comes up trough the cistern lid and attaches to the reverse of our flush button, when the bottom in pushed this ...

...flush buttons have jammed in the flush position. Water is constantly running into the toilet as a result so have had to turn it off. I can't take the cistern lid off due to the flush buttons being ...

Is there a way to change the toilet from front flush to top flush to accommodate the button on the top of the unit in the tank? I have an American standard toilet with a self contained unit in the ...

...flush buttons roca toilet with a full and half dual flush buttons. When I go to press the half button , both buttons go down but when I press the full button , only that one goes down. Any help? ...