Questions & Answers for: Fisher and Paykel floods

Question about DS605I Built-in Dishwasher

Fisher and paykel ds603 has

Fisher and paykel ds603 has F! error message, no flooding. How can I reset it It sounds like it has flooded in the past and some other tech told you to "just dry out the flood sensor and it will be ...

Question about 23 in. DD-603 Built-in Dishwasher

1 Answer

My f & p dishdrawer model DD603 has fault code F1:

my f & p dishdrawer model DD603 has fault code F1: flood switch has been activated. can i fix this myself Yes, you need to gain access to the inside bottom panel of the dishdrawer and drain/dry the ...

Question about 23 in. DD-603SS Built-in Dishwasher

1 Answer

Doulbe Draw model receiving an F1 error message.

Doulbe Draw model receiving an F1 error message. have turned off water and power and tried again but same problem F1 indicates flood switch has been activated. I wouldn't advise you attempt repair on ...

Question about 23 in. DD-603SS Built-in Dishwasher

1 Answer

FI error message from both drawers. We had a

FI error message from both drawers. We had a FI error message from both drawers. We had a lightening storm and the power was out for about a minute. Can I reset or ??? F1 indicates flood fault. There ...

Question about 23 in. DD-603SS Built-in Dishwasher

1 Answer

Says F1 with a picture of wrench. Won't shut off.

Says F1 with a picture of wrench. Won't shut off. Water in the bottom of the unit, has activated the flood switch. take out the bottom drawer, mop out the water, hope for the best!.... If it works, ...

Question about 24 in. DD603H W Built-in Dishwasher

1 Answer

Code F1 keeps draining constantly

Code F1 keeps draining constantly Turn off the main power to the dishwasher. I am assuming you are getting F1 error code flashing on the LCD display. This occurs if the flood switch is activated. The ...

Question about 23 in. DD-603 Built-in Dishwasher

1 Answer

Flood switch activated, intermittent beeping,

Flood switch activated, intermittent beeping, motor will not turn off Please confirm if it is a single or a double drawer. How do you know the flood switch is activated? Do you have a display on your ...

Question about 23 in. DD-603 Built-in Dishwasher

1 Answer

How do I turn off the flood switch sensor on a

How do I turn off the flood switch sensor on a fisher and Patel double drawer dishwasher Unfortunately there is no way to turn the flood sensor switch off, you need to pull the lower drawer all the ...

Question about DS602 Dishwasher

1 Answer

What is the flood switch on a dw60cdx1

what is the flood switch on a dw60cdx1 We had an F1 error with our F&P dish draw,Isolated the power to machine, then I removed the drawer & cover from the flood sensor, Dried water with towel

Question about 23 in. DD-603 Built-in Dishwasher

1 Answer

Remove flood switch cover

Remove flood switch cover The flood switch is accessed by removing the bottom drawer. The flood switch cover is removed by sliding to the right. There is a release clip underneath about mid point of ...