Questions & Answers for: flexible cable

...flexible cable, here I put some examples about these type of connectors:As you can see the black or brown latches are there to press the flexible cable contacts down to the connector contacts and ...

...flexible cable. Replace the following as necessary: flexible cable, CIS, reader controller PCB. the light intensity of the cis is faulty disconnect and then reconnect the flexible cable 1.replace the ...

...flexible cable between lcd board and main board of camcorder seems lose, open lcd cabinet and insert flexible cable in connector of lcd board properly to get image in lcd screen. Below image shows ...

...flexible cable that is connected to the CF card connector. 3rd, 4th, 5th, and bottom pictures from top show how the flexible cable is bowing upward immediately next to the connector and is giving ...

...I have. I would be very grateful for any advice as not that much trained in computers. Thanks 0300 Flexible disk drive (A) boot error POST has detected the flexible disk drive (A) reported an error ...

...ir 2870 it shows code E000225-0001 The light intensity of the CIS is faulty. Disconnect and then connect the flexible cable. Replace the following as necessary: flexible cable, CIS, reader ...

...During shading operation, the intensity is below a specific level,disconnect and then connect the flexible cable. Replace the following as necessary: flexible cable, CIS, reader controller

need replacement flexible flat cables The flexible flat cables that fit into the print head have become damaged and need replacing. I would buy a new printer, most likely cheaper than the ribbon ...

Canon3225 problam e00225canon Faulty in light intensity of CCD Disconnect and then connect the flexible cable. Replace the flexible cable,CCD unit or reader controller PCB

IR 3225. How can I correct error E225? Disconnect and then connect the flexible cable. Replace the flexible cable, CCD unit, and reader controller PCB.