Questions & Answers for: fix blender motor

...blender express and I can't get it opened to fix it. I have removed all the screws on the bottom but I still can't get the bottom off. Does anyone have any ideas? I removed the motor coupling and ...

blender (motor) doesn't operate when I fix the lid/container. I don't believe, I misused it by over heating or putting in water. I think, the motor is the problem. I will appreicate if you can provide

...fix it with your help. fyi: The blender motor base is leakproof and I have noticed some black sooty material/deposits on the base. Remove the bottom clean the unit fully. Add the bottom blad assebly ...

...i press the power button! same problem is happening to my mothers. both brand new. have you fix the container? most blender today has a switch to verify if the blender container is fixed to the

blender had been used just for 4 times after it is bought. Now it is broken. While using it gave off some bad smell like burning of coils or something like that. Now i want to fix it up. what can i do

...blender jar. The coupling seems to easily turn without the jar. Then the blades neve turn, once fully assembled. Is there a fix-it-yourself solution? Thank you! It must be one of the clutches not ...

fix it, and unfortunately will probably blow again. I'm dealing with a similar issue. I was making a batch of hummus, I fear that the blender was overloaded. It struggled to churn, and eventually just

...fix the blender,the motor works ok but the blades don't move I took it apart,and screw it back very tight check to make sure the drive stud is spinning with the motor. If it is, make sure the blade ...

Blender is empty, I've check to see that it is assembled correctly and the black coupling on base is not worn. Any ideas if this sounds like a simple fix or a major motor problem. Worth fixing or time

...fix this blender. Wire is off. Need a picture of where the wire goes Send it back under the lifetime warranty on the motor. The motor is not working, right? ...