Questions & Answers for: Maytag how to fit a door hinge

...door off to see if it is on right but there seems to be only one way it does fit. I looked at other new ones just like it in the store and they all seem to fit the same. Since I can't get the heat to ...

...fit into. (This is a reversable door designed for easy removal by the customer) 2. Remove the two screws on the opposite side of the frame where the door closes to. (along with the two white plastic ...

...side-it is fine? Check on the hinge side of the door, often the gasket does not fit properly if the door is not correctly aligned and the gasket ends up bending and preventing the door from

fit- just doesn't catch Take a second look at the door. Is the spacing the same between the door top and bottom as it fits into the front cover? Over time, people/children will rest weight on the door

...fit it in to a house. Removing the doors will get you 2 inches. Look at the hinges, the one on top of the top door has screws to remove and the bottom of the top door fits onto a pin. Similar for the ...

...nylon washer between the bottom of the doors and the hinge. Also, the hinge mounting screws generally can be loosened, the door shifted a bit, then re-tighten the screws to adjust the fit of the

...door . now if you have one of those screwdrivers that you change the bit in . and i think everyone has one . but that will fit on the nut head screw . loosen them up along the bottom and up bout half ...

...for the spring goes but don't no where the plastic piece hooks to. that connects to the door hinge,on the hinge is a notch shaped similar to the shape of that linkage and it fits there on the ...

...fit into that linkage and the liknage fits onto the door hinges. This link is a parts breakdown for your model and item #6 is the spring and item #11 is the linkage..their is 2 of them (one on the ...

door hinge. This washer keeps popping out after several times of opening and closing the door. It almost appears as if it is getting squeezed out. After the washer pops out, the left door is about 1/8