firing order, 180 out. please help. thomas pull number 1 up go from there see which way rotor button is pointing match wires according Just a thought, here. If you are using the original damper pully,
firing order 1967 mustang 289 firing order 1-5-4-2-6-3-7-8
firing order diagram for a 289 motor Firing Order: 1-5-4-2-6-3-7-8 Distributor Rotates Counter-Clockwise
...the nut an additional 1 / 4 of a turn. Repeat this procedure for each valve, turning the crankshaft 1 / 4 turn to the next mark each time and following the engine firing order of
...the nut an additional 1 / 4 of a turn. Repeat this procedure for each valve, turning the crankshaft 1 / 4 turn to the next mark each time and following the engine firing order of
Question about 1966 Mustang
...firing order. could the valves be too loose or too tight causing this problem? Once you checked and double check your work, no vacuum leaks, valve lash, fuel pressure and volume, call Axelrod for ...
...1966 ford mustang has a 289 engine Okay, you have to set the number 1 cylinder at TDC of its compression stroke, and then drop in the distributor so the rotor is pointing to the #1 spark plug wire ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions