Questions & Answers for: fe washer

Ad

Question about WM-2277HW Front Load Washer

1 Answer

...washer is plugged in, FE means water is too high and water pump will turn on. This happens most often when a water fill valve will not shut off completely, allowing water to continue to fill washer, ...

Ad

Fe Windscreen Washer Motor Fault Hi, windscreen washer pump on my 2003 Hyundai Santa Fe (petrol) is not working (at all), although wiper motor is. Might be a fuse, but can't identify which fuse is for

Ad

I am getting fe error after the water fills in.it doesnt start washing. What to do? The FE error isn't common to all washers. In fact, I could only find information on it in relation to LG washers. I ...

Question about WM-2277HW Front Load Washer

2 Answers

...washer if "FE" or "PE" appears on the display. The "FE" error means the water valve is faulty and the washer is overfilling. "PE" means the water level sensor is faulty. Hope helps. Hi from retired ...

...FE. Have LG front load washer that is leaking underneath the front left corner and the display code is FE when the leaking happens. The machine does not turn the drum when this code is present "FE", ...

Question about WM-2277HW Front Load Washer

0 Answer

Washer has code FE Clogged pump hose. See this: http://www.justanswer.com/appliance/6e4pm-lg-washer-giving-error-code-either-fe.html

...wm2016cw washer machine FE error code The FE error or fault code indicates that the washer is overfilling due to a defective water inlet valve. The valve is not repairable and will need to be ...

Question about WM2016C

2 Answers

FE code on LG washer. I just had the drain pump filter replaced. Now have a FE code. The FE code is an excessive water supply if the water is continuously running into the machine it may be due to a ...

...IT DID NOT. THE WATER TEMPERATURE IS 20 AND THE SPIN SPEED INTENSITY IS 1200. EXPLAIN OR ANSWER WHY I HAVE THE FE ERROR ON THE WASHER? SO I SHOULD HAVE REPLACED BY 2016 LG LATER. IT CANT HOLD TO ...

...FE error code indicates the washer is overfilling. This is usually the result of a faulty water valve. 1. Close both water taps. 2. In order to drain out any trapped water, power the washer back on ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

Brad Brown

Level 3 Expert

18121 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...