...thermostat is just slightly down and right of the water pump which is directly behind the engine fan and belt pulleys. I bought a Haynes Repair Manual and find it absolutly priceless in doing my ...
...fan clutch,now here where I am not sure what to do I see 4 bolts on the cam shaft pulley and the center nut I have a puller to remove the harmonic balancer,which from what pictures I have seen the ...
PULLEY SYSTEM CAME OFF THE LEFT SIDE OF THE MOTOR ENDED UP CAUSING METAL SHAVING'S AND DAMAGED RADIATOR FAN , ?????? WHAT COULD CAUSE THIS TO HAPPEN , COULD IT BE FROM ESCAPED BOLTS? This could be the
...Fan/alternator belt plus the other two belts on a 1999 Toyota 4Runner. It appears to be simple in that you merely need to loosen the bolt on the tensioner pulley to remove and replacethe belts. The ...
...the water pump. The pump may not have play in it indicating it is bad, but the shaft inside cold be broken so that the fan turns and the pulley turns on the outside but not internally where it
...fan and radiator and pull the accessory belts off. Remove the crank pulley, timing cover and loosen the timing belt tensioner. Id reccommend changing the water pump/thermostat while you are in there ...
...fan belt in a 1994 Toyota 4Runner and there was still a loud screeching noise and it doesn't seem like the top pulley is turning. sounds like the pulley bearing is bad and has failed -- remove the ...
...to be stuck the motor starts but squeals and the belt doesnt move Check the pulley behind the fan clutch, remove the belts and check for a seized pulley, the fan should spin by hand with the
...ther and fan/cam shaft pully is not turning. What is it and how do I fix it. Please help. Julie Th cam shaft pulley has to be turning if motor running. Maybe fan is equipped with clutch that is
Usually answered in minutes!
676 Questions
427 Questions
430 Questions
361 Questions
348 Questions